Specifications

3–17

Cordless Systems Manual

You are sending five digit data into the Auxiliary Port; however, your host system

can only accept data which has eight digits. You must add three zeroes to the

beginning of the Aux Port data.

Aux Data Formatter Example

H Scan the

Enter Aux Data Format

bar code (page 3–15).

H Scan the

bar codes for Universal Terminal Type.

Refer to the Aux Format Editor Commands Chart on page 3–16 to format the

following example. The programming bar codes on page 3–15, and the

alphanumeric bar codes on the inside back cover are used to program the data

formatter.

H Scan the

bar codes, the Hex value for the Auxiliary Port.

H Scan the

0005

bar codes for the data length.

H Scan the

(send XX character NN times command) bar codes, scan

bar codes (the Hex value for a zero), scan

bar codes (send three times).

H Scan the

Save

bar code to end Aux Format Editor selection.

The following are the Aux Editor Command Sequences:

Received Must send

12345 00012345

H Scan the

and

bar codes to send all data followed by a NUL (NUL= 00

in Hex value).