User's Manual Part 9

Configuration Worksheet 153
7.7 Audible Alarms Suspension Time Default
While monitoring a patient, the clinician can use the settings menu to suspend all
alarm tones for all parameters for a configurable period.
What is the period for which alarm tones are to be suspended?
__ Disable (alarm tones cannot be suspended)
__ 90 seconds
__ 2 minutes
__ 3 minutes
__ 4 minutes
__ 5 minutes
__ 10 minutes
__ 15 minutes
__ 30 minutes
__ 60 minutes
__ Always On (alarm tones always suspended)
7.8 NIBP Units Default
Select the NIBP display units. (Note: If the monitor is connected to an Acuity
Central Station, this setting is forced to mmHg.)
__ mmHg
__ kPa
7.9 NIBP Auto Mode Interval (minutes)
When the monitor is in Auto NIBP mode, what is the default interval, in
minutes, between automatic NIBP measurements?
__ 1
__ 2
__ 3
__ 5
__ 10
__ 15
__ 30
__ 60
7.10 Resp On Default
During ECG monitoring, should the monitor also monitor impedance respiration
rate (Resp) by default?
(Yes)
(No)
Note
This parameter does not affect the behavior of , (Silence/Reset). Regardless
of how this parameter is configured, pressing silences a sounding alarm
tone for 90 seconds.
Suspend can be turned on or off by the clinician, but the suspend period
cannot be changed by the clinician.