User's Manual Part 9

Configuration Worksheet 145
4 Pediatric Mode
For each parameter, the factory default value is shown in bold. The default value is
used by the monitor unless you specify another value in this worksheet.
4.1 Use Smartcuf as Default for NIBP
An NIBP measurement can be adversely affected by many factors, including body
motion (such as convulsions or shivering), ambient vibration, vehicle motion, weak
pulse, a sudden change in blood pressure, or sudden cuff movement. When these
factors are present, Welch Allyn’s patented Smartcuf technology can greatly increase
the accuracy of NIBP measurements.
Do you want to use Smartcuf as the default for pediatric NIBP measurements?
(Yes)
(No)
4.2 Default Resp Lead
The default Resp Lead for pediatric patients is:
__ Lead 1 (RA-LA)
__ Lead 2 (RA-LL)
4.3 NIBP Mean Numerics
Note: Selecting Large reduces the size of the systolic and diastolic displays.
What character size, if any, to you want to use as the default for displaying the
NIBP Mean Numeric for pediatric patients?
__ Small
__ Large
__ Off
Note
Smartcuf will be available in 2006.
Note
Smartcuf functions only during ECG monitoring.