User's Manual Part 9

122 PC Utility Welch Allyn Propaq LT Vital Signs Monitor
Propaq LT Monitor AutoPrint Utility
With a PC connected to a printer and with a cradle configured with the optional data link
capability, you can configure the PC to print, manually or automatically, all patient data
stored in the monitor each time the monitor is placed in the cradle. (See “Printing Patient
Data” on page 103.)
Installation
System Requirements
PC on Which You Have Administrator Privileges
• CPU: 800 MHz or faster
• Hard drive: 20 GB or more
• Available RAM: 256 MB or more
• Available Port: USB 1.1
• OS: Windows 2000 or Windows XP
Printer
• Installed and configured
• Resolution: 300 minimum; 600 or higher recommended
Procedure
Launching the Installation
1. Insert the software distribution CD in a CD-ROM drive of your PC.
2. When the installation program starts, follow the instructions presented on your
computer monitor.
If you are installing on a PC running Windows XP, you might see the message shown
below. Click Continue Anyway to continue the installation.