User's Manual Part 8

108 Printing Patient Data Welch Allyn Propaq LT Vital Signs Monitor
Canceling a Print Request
When the utility receives a print request, it immediately uploads patient data from the
monitor to the PC and presents a print dialog. You have 10 seconds to cancel the print
request (which automatically exits the AutoPrint Utility). If you do not cancel, the utility
prints the patient data.
When Uploading is Complete
When the data has been uploaded and sent to the printer, the utility presents the options
to reprint the current data, print the data from another monitor, or exit the utility.
If you select to reprint, the data is printed again.
If you select to print data from another monitor, the utility prompts you to replace the
monitor in the cradle with another monitor.
If you select to exit, the utility exits.
If you do nothing for one minute after the data is uploaded to the PC, the utility exits.
Note
When the utility uploads the patient data from the monitor to the PC for printing,
the data is deleted from the monitor. If you insert another monitor and upload the
data from it, the data from the previous upload is lost.