User's Manual Part 7

86 Alarms and Alerts Welch Allyn Propaq LT Vital Signs Monitor
Silencing an Alarm or Alert Tone
A tone sounds whenever the monitor detects an alarm or alert condition.
To Silence the Currently Sounding Tone for 90 Seconds
1. P r e s s .
• The red light (alarm) or the yellow light (alert) flashes.
• After 90 seconds, if the condition is not corrected, the tone starts again.
• If the condition is corrected within 90 seconds of silencing the tone, the monitor
resets the tones for the next alarm or alert.
If a new alarm or alert condition occurs while an earlier alarm or alert is silenced, the
tone sounds again.
Figure 84. Sample Alarm Screen
Figure 85. Sample Alert Screen
2. Check the patient and provide appropriate care.
Note
Silencing the tone does not affect the other alarm or alert indicators.
%
140/78
140/78
125
125
31
31
88
88
HALL, ROBERT E.
HALL, ROBERT E.
3456187
3456187
3:00:06P
3:00:06P
Adult
Adult
Rm 239
Rm 239
HR/min
HR/min
NIBP mmHg (102)
NIBP mmHg (102)
@2:47P Manual
@2:47P Manual
Resp/min
Resp/min
SpO2
SpO2
II 1mV/cm
II 1mV/cm
X
Resp/min
Resp/min
SpO2
SpO2
I 1mV/cm
I 1mV/cm
HALL, ROBERT E.
HALL, ROBERT E.
3456187
3456187
12:41:32
12:41:32
Adult
Adult
Rm 239
Rm 239
Audible Alarms Silenced
Audible Alarms Silenced
80
80
140/78
140/78
12
12
97
97
%
HR/min
HR/min
NIBP mmHg (102)
NIBP mmHg (102)
@2:47P Manual
@2:47P Manual
EQUIPMENT ALERT
EQUIPMENT ALERT
ECG Fault
ECG Fault
LL Lead Failed
LL Lead Failed
ACKNOWLEDGE
ACKNOWLEDGE