User's Manual Part 6

82 Monitoring in Communication with Acuity Welch Allyn Propaq LT Vital Signs Monitor
To access the Acuity Menu after connection has been established:
1. Highlight and press . The Wireless Mode popup menu appears (Figure 82).
2. Highlight Acuity Menu and press .
Figure 81. Acuity Menu
You can use the Acuity Menu (Figure 81) to end the telemetry session (END TELE), assign
the patient to a new room (NEW ROOM), transfer the patient to another unit
(TRANSFER), enter the name and ID of a new patient (NEW PATIENT), or update the
information for the current patient (PATIENT INFO).
To close the Acuity Menu, highlight EXIT and press .
Note
Depending on the level of network traffic, some interactions between the monitor
and Acuity can take a few seconds to complete.
II 1mV/cm
II 1mV/cm
TRANSFER
TRANSFER
NEW PATIENT
NEW PATIENT
80
80
HR/min
HR/min
NIBP mmHg
NIBP mmHg
Resp/min
Resp/min
SpO2
SpO2
12
12
97
97
%
%
STEWART, ANN
STEWART, ANN
7762940
7762940
12:41:32
12:41:32
Adult
Adult
Rm 263
Rm 263
ACUITY
ACUITY
MENU
MENU
EXIT
EXIT
END TELE
END TELE
NEW ROOM
NEW ROOM
PATIENT INFO
PATIENT INFO