User's Manual Part 6

ManualsBrandsWelch Allyn ManualsElectronicsPropaq 802 LTRN

Table Of Contents

Monitoring in Communication with Acuity

Directions for Use Monitoring in Communication with Acuity 81

If Communication is Interrupted During Monitoring

If communicated monitoring has begun and communication is then interrupted, the

monitor displays an alert message (Figure 79).

Figure 79. Alert Message: Communications Fault

Press to clear the message.

When the monitor re-establishes communication with Acuity (after an interruption of at

least 30 seconds), it prompts you to confirm that the patient being monitored is the same

patient that was being monitored when communication was interrupted (Figure 80).

Figure 80. Same Patient Query

Press to confirm.

Note

If the communication interruption lasts less than 30 seconds, or if you save, cycle

power, and reestablish communication within 30 seconds, this confirmation is not

required.

aVR 2mV/cm

HR/min

NIBP mmHg

Resp/min

SpO2

STEWART, ANN

7762940

12:41:32

Adult

Rm 263

EQUIPMENT ALERT

Communications fault

Check Acuity/network connection

Acknowledge

aVR 2mV/cm

HR/min

NIBP mmHg

Resp/min

SpO2

STEWART, ANN

7762940

12:41:32

Adult

Rm 263

CONFIRM PATIENT?

TO 7762940 ED 263

YES

NEW UNIT

IS THIS MONITOR STILL CONNECTED

ANN STEWART

NEW ROOM