User's Manual Part 4

38 Overview of Monitor Operation Welch Allyn Propaq LT Vital Signs Monitor

To Access the Setup Menus

From any main display screen (such as Large Numerics, Dual Waveform...):

1. Highlight , HR/PR, SpO

, NIBP, Resp, or .

2. Press .

3. Highlight Setup (at the bottom of the screen) and press .

Figure 29. Setup Menus

Note If you change parameter settings and then change the patient mode (from adult to

pediatric, for example):

• all parameters are reset to the configuration default values for the new

patient mode

• all stored patient data is lost

WARNING The Setup menus are also used to access the Service menu. Do not

enter the Service menu unless you are a qualified service person.

II 1mV/cm

Exit

Trends

Snapshots

Setup

Low

Med

HR/min

NIBP mmHg

Resp/min

SpO2

Off

Alarm Tone

Suspend Audible Alarms

Setup

(90 sec)

ID: 01018VDO9PBH

3:00:06P

Adult

Rm 239

Alarms

ECG

NIBP

Timings

High

Service

SIMULATION

Setup