User's Manual Part 3

28 Overview of Monitor Operation Welch Allyn Propaq LT Vital Signs Monitor
Detaching the Bed Rail Hook from the Cradle
If you are attaching the interface box to the cradle and if the cradle and the bed rail hook
are attached, you must first detach the bed rail hook from the cradle (Figure 21).
1. Remove the two screws from the back of the bed rail hook.
2. Lift the bed rail hook off of the shoulder screws on the back of the cradle.
3. Remove the shoulder screws from the back of the cradle.
Figure 21. Detaching the Bed Rail Hook from the Cradle
1
3
2