User Manual Part 5

ManualsBrandsWelch Allyn ManualsElectronicsPropaq 802 LTRN

Directions for Use Standalone Monitoring 53

8. Verify that the displayed time and date are correct.

• The monitor displays time in either the 12-hour (AM/PM) or 24-hour format, and

displays date in either the mm/dd/yy, dd.mm.yy, or yy/mm/dd format.

• The date does not appear on the primary display screens. It appears on the

snapshot list and on the snapshot display.

a. Highlight the time display (in the upper right corner of the screen) and press .

The Time/Date screen appears (Figure 50).

Figure 50. Time/Date Screen: 24-Hour Format

b. If the displayed time or date is not correct, press or to move the highlight

from one parameter to another, and press or to change the value of the

highlighted parameter. For example, to change the time display format from

24-hour to 12-hour, highlight Time Format and press either or once

(Figure 51).

Figure 51. Time/Date Screen: 12-Hour Format

c. When the time and date are correct and formatted appropriately, press to

accept the changes and return to the vital-signs display.

Note

If you change the time or date settings and then decide not to accept the

changes, press to cancel the changes and return to the vital-signs display.

II 1mV/cm

Year

Date Format

HR/min

NIBP mmHg

Resp/min

SpO2

14:49:37

Adult

Time Format

Hour

Minute

Month

Day

HALL, ROBERT E.

3456187

Rm 239

12 Hour

24 Hour

2005

mm/dd/yy

dd.mm.yy

yy/mm/dd

Set

Cancel

24-hour format