User Manual Part 5

ManualsBrandsWelch Allyn ManualsElectronicsPropaq 802 LTRN

Directions for Use Standalone Monitoring 73

Taking NIBP Readings Using the Digital Manometer

To Use the Digital Manometer

1. Attach the appropriate cuff to the patient. (See Step 1 on page 69.)

2. In the NIBP control menu (see “Using Control Menus” on page 34), highlight

Manometer. The manometer menu appears (Figure 71).

Figure 71. NIBP: Manometer Initial View

3. Press to start the NIBP measurement cycle. When the cuff is inflated, the

manometer bar dynamically displays the pressure reading (Figure 72).

Figure 72. NIBP: Manometer Reading in Progress

When the cycle completes, measurement numerics appear below the waveform grid

and the systolic, diastolic, and MAP values are displayed as markers along the

manometer scale (Figure 73).

NIBP Mode:

II 1mV/cm

Exit

Trends

Snapshots

Setup

HR/min

NIBP mmHg

Resp/min

SpO2

NIBP

Systolic

Diastolic

Mean

STEWART, ANN

7762940

3:00:06P

Adult

Rm 263

Manometer

Manual

100

150

200

250

300