User Manual Part 5

ManualsBrandsWelch Allyn ManualsElectronicsPropaq 802 LTRN

68 Standalone Monitoring Welch Allyn Propaq LT Vital Signs Monitor

Figure 68. SpO

Spot Check: Waiting for an SpO

Signal

• After a few seconds, the SpO

heart-beat indicator starts showing heart beats.

• After about 30 seconds, SEARCH disappears and the pulse oximetry reading

appears (Figure 69).

Figure 69. SpO

Spot Check: Pulse Rate Reading

• The spot check ends, and SpO

monitoring is again turned off.

•The SpO

text on the display screen now includes the time of the most recent

SpO

measurement. For example: SpO

@ 3:05P.

5. Detach the sensor from the patient.

6. To take another spot check later, repeat from step 2.

To Return to Continuous SpO

Measurements

1. Highlight SpO

@ XX:XX and press .

2. Press to turn automatic SpO

On. The pop-up menu disappears.

To Adjust the SpO

and ECG Pulse Tone Volume

1. Highlight SpO

and press .

2. Highlight HR/PR Tone.

3. Highlight the desired volume level (Off, Low, Med, or High) and press .

Note

Spot checks are included in trends displays.

HALL, ROBERT E.

3456187

3:11:30P

Adult

Rm 239

Resp/min

PR/min

SpO2 Spot Check

NIBP mmHg

S D M

SEARCH indicates that the monitor

is waiting for pulse oximetry data.