Product Manual

APPENDIX A

If your wireless security environment is LEAP then you will need to

enter: Security: WPA-LEAP

LEAP User Name

LEAP Password

NOTE: LEAP user name and password are limited to 32 characters.

If your wireless security environment is PEAP then you will need to

enter: Security: WPA2-PEAP

PEAP User Name

PEAP Password

NOTE: PEAP user name and password are limited to 63 characters.

NOTE: When saving the WLAN configuration, the device may require several seconds to complete the

saving procedure.

GPRS Mobile Transmission

CAUTION: GPRS mobile hookup time will vary depending on location. It may require

between 5 and 60 seconds to initiate a communication link. Signal loss at the onset of transmission

or during transmission may occur due to environmental variables.

NOTE: The location for antenna for GPRS and WLAN are interchangeable.

GPRS option applies to ELI 150c only.

GSM (Global System for Mobile communications) is a world standard for digital cellular communications. GPRS

(General Packet Radio Service) is the digital data transmission standard for the GSM network. Similar to GSM

cellular phones, the ELI 150c GPRS mobile connectivity option requires a Subscriber Identity Module (SIM) smart

card. A SIM comprises a microcontroller, ROM for programs, and EPROM for information. Information stored on

the SIM includes the International Mobile Subscriber Identity (IMSI) which is a unique identifying number, plus

various network-specific user and security data..

SIM cards and data network plans are not offered for sale by Welch Allyn and must be purchased separately from

your local provider. The ELI 150c GPRS mobile connectivity option is factory installed. Please note that for GPRS

mobile transmission, the SIM card must have data capabilities enabled.

For GPRS mobile transmission, set the Sync media to GPRS in the configuration. Choose the radio frequency

band appropriate for your location: 900/1800 MHz are used in most parts of the world: Europe, Asia, Australia,

Middle East, Africa; 850/1900 MHz are used in the United States, Canada, Mexico and most countries of South

America.

The following wireless network parameters must be provided by the IT Manager of the facility where the

receiving station (e.g. E-scribe) is located:

Host IP

Port Number

NOTE: The receiving station’s IP-address must be visible on the public network (Internet).

The following parameters must be provided by the network service provider of the SIM

card: Access Point Name

Access Point User Name

Access Point Password

The Access Point Name (APN, also called WAP) is a string with structure “NetwordID.OperatorIdentifier”.