Product Manual

APPENDIX A
88
Modem Transmission
For a modem transmission, set the Sync media to modem. Connect the device to a standard telephone jack with
the provided phone line cable. Plug the cable into the telephone jack located on the back of the device and the
other end into a telephone wall jack. Confirm telephone number in the configuration settings.
CAUTION: Use only No. 26 AWG or larger telecommunication line cord.
Modem Initialization
The modem initialization string is country specific. At the time of production, the modem initialization string is
configured for the country of purchase; however, if the unit is relocated to a different country, the modem
initialization string will need to be modified.
From the real time ECG view:
1. Power on the device.
2. Press F6 (More).
3. Simultaneously press and hold SHIFT+ALT+M.
4. The country code will display on the bottom of the screen.
5. Verify the code is correct by using the table in this section. If the code is correct for your
country, press F6 (Exit).
6. If the code is incorrect for your country, press F2 and enter “+CGI=”, then enter the correct code
for your country.
7. Press F1 to send the new code to the modem.
8. After the code has been sent, the device will query the modem and display its current configuration.
9. Press F6 (Exit) to end the procedure.