Product Manual

67
SECTION 4
Configuring Users when Log-In Authentication is ON
1. From real-time ECG view, select F6 (More) followed by F5 (Set Time/Date).
2.
While holding down • (SHIFT) , depress ALT and P simultaneously.
3. If required, enter the admin password. This will automatically advance you to the User List.
NOTE: The factory default password is “admin” (lowercase, no quotation marks); it is suggested that the
password be changed after installation of the unit.
The User List displays one user per page. Advancing to the next page by selecting F4 (Page) will show the
information for the next user. The device can hold up to 30 different users. If the User List is not full, the last
page in the list will be blank and is used for creating new users. Selecting F3 (Add) will advance to the last page
to add a new user. When on a user’s page, selecting F5 (Delete) will delete that user. Select F6 (Save) to save
changes and exit the User List.
Each new user will be assigned a username, password, role, and up to three site numbers. If a user attempts to
create a new user by using a username which already exists, an error message will appear and prevent
username duplication.
When setting the role for the user, there are three options to choose from: Technician, Site Administrator, and
Administrator. Each of these three roles, along with a guest role, are given permission to access different
features of the device. The admin role has access to all device features while the other roles only have access to
a subset of features as defined in the table below.