Product Manual

SYSTEM SETTINGS

SECTION 4

Configuring Users and Roles

Options for configuring users and roles depends on whether Log-In Authentication is set to ON or OFF in

Configuration Settings. If Log-In Authentication is OFF, three generic roles, Technician, Site Admin, and

Admin, can be activated to manage access to specific device features.. If Log-In Authentication is ON, up to

30 unique users can be configured for the device. The default device setting has Log-In Authentication set

to OFF, and no active roles.

Configuring roles when Log-In Authentication is OFF

When Log-In Authentication is OFF, a user can access the basic ECG functionality of the ELI 150c without

entering a password. If the user attempts to access features that require additional authorization, they will

be prompted to input the password of an authorized role. The table below shows which features are

accessible by which roles. The Admin roll has access to all device features.

NOTE: If the password for the Technician remains blank, a guest to the system will have the same access as

described in the Technician column

To configure the roles:

1. From real-time ECG view, select F6 (More) followed by F5 (Set Time/Date).

While holding down

•

(SHIFT)

, depress

ALT

and

simultaneously.

3. If required, enter password. This will automatically advance you to the set passwords display.

4. Select which role you want to set the password for: Technician, Site Admin, or Admin.

NOTE: The factory default password for the Admin is “admin” (lowercase, no quotation marks); the default

for the Site Admin is “siteadmin”; the default for the Technician is a blank field. It is suggested that the

password be changed after installation of the unit if utilizing role-based access features.

5. Enter a password for the selected role followed by a second entry to confirm.

NOTE: Password is case sensitive and alphanumeric.

6. From this display, select F6 (Exit) to return to real-time ECG view.