Product Manual

49
EQUIPMENT PREPARATION
SECTION 2
Initial Startup
With its initial use, the device requires the user to set certain configurations prior to obtaining any ECGs. The
device will automatically display a language configuration page followed by AC filter frequency, height/weight
units, a set time/date configuration page (including daylight savings time selection), and a configuration page
to pair the WAM™ (wireless acquisition module) if it will be used. (Refer to the WAM user manual for detailed
pairing instructions to the device.)
Connecting the Acquisition Module
Connect the AM12™ to the ECG connector at the rear of the device. When using the optional WAM for ECG
acquisition, the connector is not required.
Figure 2-1*
*ELI 250c shown.
NOTE: The device must be configured at the factory for use with the WAM. Select F6 (More) followed by
F6 (More) to determine the device’s setting. “WAM Option Not Available” will display if the
device is not configured to work with the WAM.
NOTE: WAM must be paired to electrocardiograph before operation.
Connect AM12 to the ECG