Product Manual

INTRODUCTION

SECTION 1

Manual Purpose

This manual is intended to provide the user with information about:

• Using and understanding the ELI™ 150c or ELI 250c electrocardiograph, the function and feature

keys, and the display screen.

• Preparing the device for use. (Section 2)

• Acquiring, printing, and storing an ECG. (Section 3)

• System settings. (Section 4)

• Connectivity and transmitting ECGs. (Appendix A)

• Maintenance and troubleshooting. (Appendix B)

NOTE: This manual may contain screen shots. Any screen shots are provided for reference only and

are not intended to convey actual operating techniques. Consult the actual screen in the host

language for specific wording.

Audience

This manual is written for clinical professionals. They are expected to have working knowledge of medical

procedures and terminology as required for monitoring cardiac patients.

System Description

The device is a 12-lead diagnostic electrocardiograph used for acquiring, viewing, and printing adult and

pediatric 12-lead ECG data. The device is optionally equipped with Welch Allyn’s VERITAS™ resting ECG

interpretation algorithm with age and gender specific criteria. If this option is enabled (see Section 4) the

VERITAS algorithm can provide an over-reading physician with a silent second opinion through diagnostic

statements output on the ECG report. For additional information on the VERITAS algorithm, please refer to the

Physician’s Guide Adult and Pediatric user manual.

(See Accessories.)

The device can be configured with expanded memory, bidirectional connectivity, and DICOM

protocol

support, and operates on battery or line power.

Supported print formats for the ELI 150c include: standard or Cabrera 3, 3+1, 3+3, or 6 channel in automatic

mode; 3 or 6 channel rhythm strip printing.

Supported print formats for the ELI 250c include: standard or Cabrera 3+1, 3+3, 6, 6+6, or 12 channel in automatic

mode; 3, 6, or 12 channel rhythm strip printing.

With either model, during rhythm strip printing the user can toggle between the various channels (default leads,

limb and chest leads, etc.) to print by selecting F2 (Leads). To suspend a rhythm strip print, press F6 (Stby);

press

F6 (Cont) to resume. Press STOP at any time to end rhythm strip printing.