Product Manual

21
GENERAL CARE
Precautions
• Turn off the device before inspecting or cleaning.
• Do not immerse the device in water.
• Do not use organic solvents, ammonia-based solutions, or abrasive cleaning agents which may
damage equipment surfaces.
Inspection
Inspect your equipment daily prior to operation. If you notice anything that requires repair, contact an
authorized service person to make the repairs.
• Verify that all cords and connectors are securely seated.
• Check the case and chassis for any visible damage.
• Inspect cords and connectors for any visible damage.
• Inspect keys and controls for proper function and appearance.
Cleaning and Disinfecting the ELI 150c and ELI 250c
Disinfecting agents
The ELI 150c and ELI 250c are compatible with the following disinfectants:
• Clorox Healthcare
®
Bleach Germicidal Wipes (use according to instructions on product label), or
• a soft, lint-free cloth dampened with a solution of sodium hypochlorite (10% household bleach and
water solution) minimum 1:500 dilution (minimum 100 ppm free chlorine) and maximum 1:10
dilution as recommended by the APIC Guidelines for Selection and Use of Disinfectants.
Caution: Disinfecting or cleaning agents that contain Quaternary Ammonium Compounds (Ammonium
Chlorides) have been identified as having negative effects if used to disinfect the product. Use of such
agents may result in discoloration, cracking, and deterioration of the external housing of the device.
Cleaning
To clean the ELI 150c and ELI 250c:
1. Disconnect the power source.
2. Remove cables and lead wires from device before cleaning.
3. Thoroughly wipe the surface of the ELI 150c or ELI 250c with a clean, lint-free cloth dampened
with a mild detergent and water for general cleaning or use one of the above recommended
agents for disinfection.
4. Dry the device with a clean, soft, dry, lint-free cloth.