Product Manual

APPENDIX A

NOTE: The site number must be configured in the electrocardiograph and recognized as an established,

valid site number at the E-Scribe before downloading the custom ID.

TIP: Confirm the baud rate in the configuration settings before downloading the custom ID from ELI Link

or E-Scribe (applies to ELI 150c only).

USB Memory

Both the ELI 150c and ELI 250c come equipped with a standard USB host port which can be used to transmit

patient records from the device’s internal memory to an external USB memory stick. In addition, either device can

be equipped with an optional USBD (device) port. The optional USBD port can be used to directly connect the

device to a PC running ELI Link V3.10 or later.

Transmission using the USB host port to a USB memory stick

USB memory communication media permits storage of patient records to an external USB memory stick. The files

will be saved in UNIPRO32 format for transfer to the E-Scribe or a compatible electronic information management

system.

NOTE: Device is compatible with FAT32 formatted USB memory sticks.

NOTE: The USB memory stick must not contain any automatic features (e.g., Sandisk U3). Uninstall any

features from the memory stick before connecting it to the device.

NOTE: All communication options (MODEM, LAN, WLAN, GPRS) including time sync and orders

download are disabled when a USB memory stick is inserted in the device.

NOTE: Upon successful transmission the device display will state “Transmission status transmit

complete. Press any key to continue.” The total number of patient records transmitted to the USB

memory stick will also appear.

NOTE: Patient records transmitted to a USB memory stick are marked as transmitted by the device.

Transferring Individual Patient Records to the USB Memory Stick

 Place the USB memory stick into the USB host port on the back of the device.

 Select F6 (More) from real-time ECG view.

 Select F1 (Directory of Stored ECGs).

 Select the patient record to be stored to the USB memory stick.

 Select SYNC.

Transferring Batch Patient Records to the USB Memory Stick

 Place the USB memory stick into the USB host port on the back of the device.

 Select SYNC.

 Select F1 (Batch).