Product Manual
Table Of Contents
- 1. Getting started
- 2. Recording an exercise ECG
- 2.1 The Real-time monitor
- 2.2 Record an exercise ECG
- 2.3 Real-time monitor
- 2.3.1. Select how you want to view leads
- 2.3.2. Measure blood pressure
- 2.3.3. Capture an event
- 2.3.4. Patient Perception Parameters
- 2.3.5. Duke Treadmill Score
- 2.3.6. Add a comment
- 2.3.7. Apply filters
- 2.3.8. Manual load change
- 2.3.9. Pacemaker pulse detection
- 2.3.10. Signal quality indication
- 2.3.11. Printing during recording
- 2.3.12. Target heart rate
- 2.3.13. Target Workload
- 3. Viewing an exercise ECG
- 3.1 About viewing exercise ECGs
- 3.2 View an exercise ECG
- 3.3 Work with the Summary view
- 3.4 Work with the Averages view
- 3.5 Work with the Full disclosure view
- 3.6 Work with the 2x6 and 4x3 view
- 3.7 Work with the Trends view
- 3.8 Work with the ST table view
- 3.9 Work with the Heart rate view
- 3.10 Work with the ST/HR view
- 4. Interpreting an exercise ECG
- 5. Printing an exercise ECG
- 6. Maintaining the recorder
- 7. Customizing the Exercise ECG module
- 8. Customize exercise protocols
- 9. Troubleshooting
- 10. Before installing the Exercise ECG software
- 11. Installing the Exercise ECG Module
- 12. Safety and precautions
- 13. Guidance and Manufacturer’s Declarations
- 14. Function keys
- 15. Additional information
CardioPerfect Workstation
Exercise ECG Module - User Manual
DIR 80012335 Ver. D 61 / 83
8.5 Working with protocols
8.5.1. Create a new protocol
The procedure for creating a new protocol is the same for treadmill, ergometer, blood
pressure and printer protocols. After you create a new protocol, continue with defining the
stages for that protocol.
To create a new protocol:
1. Select the Protocol editor from the Tools menu.
2. In the left pane of the protocol editor, first left click on the type of protocol that you
want to create (treadmill, ergometer, blood pressure or printer). Then right click on the
selected protocol type.
3. In the shortcut menu, click New. A new protocol is added to the protocol list.
4. Select the measurement units (mph or km/hr) for the new protocol if a treadmill
protocol was selected.
5. Enter a name for the new protocol.
8.5.2. Import a protocol
With the import function, you can import protocols that were created with previous versions of
Welch Allyn CardioPerfect Exercise ECG.
To import a protocol:
1. In the Protocol menu, click Import.
2. In the Open dialog box, select the protocol that you want to import and click Open.
8.5.3. Delete a protocol
When you no longer use a protocol, you can delete it.
To delete a protocol:
1. Select the protocol that you want to delete.
2. Right click on the protocol.
3. In the shortcut menu, click Delete.