Product Manual
Table Of Contents
- 1. Getting started
- 2. Recording an exercise ECG
- 2.1 The Real-time monitor
- 2.2 Record an exercise ECG
- 2.3 Real-time monitor
- 2.3.1. Select how you want to view leads
- 2.3.2. Measure blood pressure
- 2.3.3. Capture an event
- 2.3.4. Patient Perception Parameters
- 2.3.5. Duke Treadmill Score
- 2.3.6. Add a comment
- 2.3.7. Apply filters
- 2.3.8. Manual load change
- 2.3.9. Pacemaker pulse detection
- 2.3.10. Signal quality indication
- 2.3.11. Printing during recording
- 2.3.12. Target heart rate
- 2.3.13. Target Workload
- 3. Viewing an exercise ECG
- 3.1 About viewing exercise ECGs
- 3.2 View an exercise ECG
- 3.3 Work with the Summary view
- 3.4 Work with the Averages view
- 3.5 Work with the Full disclosure view
- 3.6 Work with the 2x6 and 4x3 view
- 3.7 Work with the Trends view
- 3.8 Work with the ST table view
- 3.9 Work with the Heart rate view
- 3.10 Work with the ST/HR view
- 4. Interpreting an exercise ECG
- 5. Printing an exercise ECG
- 6. Maintaining the recorder
- 7. Customizing the Exercise ECG module
- 8. Customize exercise protocols
- 9. Troubleshooting
- 10. Before installing the Exercise ECG software
- 11. Installing the Exercise ECG Module
- 12. Safety and precautions
- 13. Guidance and Manufacturer’s Declarations
- 14. Function keys
- 15. Additional information
CardioPerfect Workstation
Exercise ECG Module - User Manual
To customize a new summary report template:
1. Click on the Add new template button in the Exercise ECG settings-Summary tab.
2. Select which fields should be included in the Summary report.
The options button will change with the option selected above the button, if no options
are available for the selected item the button is disabled.
For example:
If Insert custom logo is selected the button changes to Insert custom logo, click on the
button and you can browse for your own custom logo.
If Maximum heart rate is selected, you can select the settings for the Maximum heart
rate with the options button.
Note: Which fields are displayed is optional; the location of the fields is fixed.
3. Click Next.
4. Enter a file name for the n
ew Summary report template.
Click Next.
If the file name already exists a warning will appear. You can overwrite the old file or
select cancel and add a new name.
5. Select Yes to change your default summary report to the generated template.
Select No to leave the settings as previous. The generated template will be available
for subsequent use.
6. Click the Finish button.
DIR 80012335 Ver. D 56 / 83