Product Manual
Table Of Contents
- 1. Getting started
- 2. Recording an exercise ECG
- 2.1 The Real-time monitor
- 2.2 Record an exercise ECG
- 2.3 Real-time monitor
- 2.3.1. Select how you want to view leads
- 2.3.2. Measure blood pressure
- 2.3.3. Capture an event
- 2.3.4. Patient Perception Parameters
- 2.3.5. Duke Treadmill Score
- 2.3.6. Add a comment
- 2.3.7. Apply filters
- 2.3.8. Manual load change
- 2.3.9. Pacemaker pulse detection
- 2.3.10. Signal quality indication
- 2.3.11. Printing during recording
- 2.3.12. Target heart rate
- 2.3.13. Target Workload
- 3. Viewing an exercise ECG
- 3.1 About viewing exercise ECGs
- 3.2 View an exercise ECG
- 3.3 Work with the Summary view
- 3.4 Work with the Averages view
- 3.5 Work with the Full disclosure view
- 3.6 Work with the 2x6 and 4x3 view
- 3.7 Work with the Trends view
- 3.8 Work with the ST table view
- 3.9 Work with the Heart rate view
- 3.10 Work with the ST/HR view
- 4. Interpreting an exercise ECG
- 5. Printing an exercise ECG
- 6. Maintaining the recorder
- 7. Customizing the Exercise ECG module
- 8. Customize exercise protocols
- 9. Troubleshooting
- 10. Before installing the Exercise ECG software
- 11. Installing the Exercise ECG Module
- 12. Safety and precautions
- 13. Guidance and Manufacturer’s Declarations
- 14. Function keys
- 15. Additional information
CardioPerfect Workstation
Exercise ECG Module - User Manual
DIR 80012335 Ver. D 44 / 83
5.1.1. Print formats
The exercise ECG Module can print the following reports:
2x6 Sequential or Simultaneous
4x3 + 1R Sequential or Simultaneous
Averages 2 pages Cabrera
Averages 2 pages
Averages
Full disclosure 25 mm/s
Full disclosure 10 mm/s
Full disclosure 5 mm/s
Heart rate
Rhythm
ST table
ST trends
Summary
Each report contains the view and a header that displays additional information.
Please refer to the Workstation manual for further information on printing exercise ECGs.
5.2 Automatically print an exercise ECG
Welch Allyn CardioPerfect Exercise ECG can automatically print an exercise ECG directly
after recording.
To automatically print an ECG after recording, you need to:
Enable automatic printing by selecting Print after recording in the Exercise ECG
settings.
Define a number of pre-selected formats that you want to have printed. Select the
formats in the Exercise ECG settings menu from the Default report formats list.
These will be the same formats that the Print Selected Formats button will print.