Product Manual
Table Of Contents
- 1. Getting started
- 2. Recording an exercise ECG
- 2.1 The Real-time monitor
- 2.2 Record an exercise ECG
- 2.3 Real-time monitor
- 2.3.1. Select how you want to view leads
- 2.3.2. Measure blood pressure
- 2.3.3. Capture an event
- 2.3.4. Patient Perception Parameters
- 2.3.5. Duke Treadmill Score
- 2.3.6. Add a comment
- 2.3.7. Apply filters
- 2.3.8. Manual load change
- 2.3.9. Pacemaker pulse detection
- 2.3.10. Signal quality indication
- 2.3.11. Printing during recording
- 2.3.12. Target heart rate
- 2.3.13. Target Workload
- 3. Viewing an exercise ECG
- 3.1 About viewing exercise ECGs
- 3.2 View an exercise ECG
- 3.3 Work with the Summary view
- 3.4 Work with the Averages view
- 3.5 Work with the Full disclosure view
- 3.6 Work with the 2x6 and 4x3 view
- 3.7 Work with the Trends view
- 3.8 Work with the ST table view
- 3.9 Work with the Heart rate view
- 3.10 Work with the ST/HR view
- 4. Interpreting an exercise ECG
- 5. Printing an exercise ECG
- 6. Maintaining the recorder
- 7. Customizing the Exercise ECG module
- 8. Customize exercise protocols
- 9. Troubleshooting
- 10. Before installing the Exercise ECG software
- 11. Installing the Exercise ECG Module
- 12. Safety and precautions
- 13. Guidance and Manufacturer’s Declarations
- 14. Function keys
- 15. Additional information
CardioPerfect Workstation
Exercise ECG Module - User Manual
Load change
Change
Keyboard
keys
Treadmill Increment/
decrement
Ergometer Increment/
decrement
[CTRL + ↑] Elevation + + 1% Load + + 5 Watt
[CTRL + ↓] Elevation - - 1% Load - - 5 Watt
[CTRL + →] Speed + + 0.1 km/h N/A
[CTRL + ←] Speed - - 0.1 km/h N/A
When a key combination is pressed, e.g. [CTRL+↑], when the load change window is not
visible, the load change window will pop-up and the corresponding load will change.
When the 'Instant manual load changes' option is enabled (Exercise ECG settings,
Devices tab), changes of the load are instant and confirmed.
The change workload window will have the following appearance:
Ergometer : Treadmill :
Upon changing, the values will immediately be sent to the exercise device.
When the 'Instant manual load changes' option is NOT set, the form has the following
characteristics:
Ergometer : Treadmill :
When OK is pressed, the new values will be sent to the device. When Cancel is pressed,
changes are ignored and the dialog window will close.
DIR 80012335 Ver. D 24 / 83