Product Manual
Table Of Contents
- 1. Getting started
- 2. Recording an exercise ECG
- 2.1 The Real-time monitor
- 2.2 Record an exercise ECG
- 2.3 Real-time monitor
- 2.3.1. Select how you want to view leads
- 2.3.2. Measure blood pressure
- 2.3.3. Capture an event
- 2.3.4. Patient Perception Parameters
- 2.3.5. Duke Treadmill Score
- 2.3.6. Add a comment
- 2.3.7. Apply filters
- 2.3.8. Manual load change
- 2.3.9. Pacemaker pulse detection
- 2.3.10. Signal quality indication
- 2.3.11. Printing during recording
- 2.3.12. Target heart rate
- 2.3.13. Target Workload
- 3. Viewing an exercise ECG
- 3.1 About viewing exercise ECGs
- 3.2 View an exercise ECG
- 3.3 Work with the Summary view
- 3.4 Work with the Averages view
- 3.5 Work with the Full disclosure view
- 3.6 Work with the 2x6 and 4x3 view
- 3.7 Work with the Trends view
- 3.8 Work with the ST table view
- 3.9 Work with the Heart rate view
- 3.10 Work with the ST/HR view
- 4. Interpreting an exercise ECG
- 5. Printing an exercise ECG
- 6. Maintaining the recorder
- 7. Customizing the Exercise ECG module
- 8. Customize exercise protocols
- 9. Troubleshooting
- 10. Before installing the Exercise ECG software
- 11. Installing the Exercise ECG Module
- 12. Safety and precautions
- 13. Guidance and Manufacturer’s Declarations
- 14. Function keys
- 15. Additional information
CardioPerfect Workstation
Exercise ECG Module - User Manual
2.3 Real-time monitor
You are now ready to record the test. In the Real-time monitor, click the Start
button to start recording. After the Start button is pressed, it will change to a
Stop test button.
Welch Allyn CardioPerfect Exercise ECG automatically starts the first phase
and stage of the test protocol and moves automatically to the next stage
according to the test protocol. To move to the next phase or stage manually,
click the button that displays the name of the Next phase or stage.
When you have reached the end of the test, click the Stop test button to stop
the test. Welch Allyn CardioPerfect Exercise ECG will ask you to switch off
the recorder. Welch Allyn CardioPerfect Exercise ECG automatically saves
the ECG.
In case of an emergency you can also use the Emergency stop button (or
F12) to stop the test. Welch Allyn CardioPerfect will immediately stop the
exercise device. The monitoring of the patient will continue and printouts can
be made.
During the test, you can:
Measure the blood pressure
Capture an event
Add a comment
Turn pacemaker mode on or off
Apply a baseline filter to filter out baseline wander
Change the load
Pause the protocol
Print a report
2.3.1. Select how you want to view leads
Once you have created a new exercise ECG, the Real-time monitor displays the ECG traces.
Before you start the actual recording, you can select how you want to view the traces. Welch
Allyn CardioPerfect Exercise ECG offers different views, different chart speeds and different
sensitivities.
To select a different view:
In the View menu, point to Monitor style and click a value. You can choose between
3, 6 or 12 simultaneous leads. The new view is immediately displayed.
To arrange the leads in 3-lead and 6-lead views:
Click on the tabs under the traces to display different lead groups.
DIR 80012335 Ver. D 19 / 83