Quick Reference Card - Quick Reference Guide User Manual

ManualsBrandsWelch Allyn ManualsEquipmentConnex

Welch Allyn Connex

Devices

Quick Reference Card

Power on/Display power-saving button

 • Locatedonthedevicehousing

 • Powersupthemonitor

 • Briefpress–Opensanonscreendialogwithoptionsto

Power down, Sleep,orCancel.

Power down

1. Touchthebatterystatusicon.

 2. TouchPower down.

Change proﬁle

1. TouchtheselectedproleindicatorintheDeviceStatusarea.

2. Selectthedesiredprole.

3. Conrmyourselection.

Central station connectivity indicators

  Connectedtothe   Disconnectedfrom

  centralstation   thecentralstation

Start/Stop blood pressure

Start intervals

1. OntheHometab,touch .

2. SelectAutomaticorProgram,andenterorselectdesiredsettings.

3. TouchStart intervals.

Stop intervals

1. OntheHometab,touch .

2. TouchStop intervals.

Mandatoryaction:

Followinstructionsforuse

Summary of content (4 pages)

PAGE 1
Welch Allyn Connex ® Devices Quick Reference Card Mandatory action: Follow instructions for use Power on/Display power-saving button Start/Stop blood pressure • Located on the device housing • Powers up the monitor • Brief press – Opens an onscreen dialog with options to Power down, Sleep, or Cancel. Power down Start intervals 1. Touch the battery status icon. 2. Touch Power down. 1. On the Home tab, touch . 2. Select Automatic or Program, and enter or select desired settings. 3.
PAGE 2
Alarm indicators and controls Icon Change view of vital signs measurements Description Alarm off No visual or audio notifications are enabled. Visual and audio notifications are enabled. Parameter frames that support multiple views of patient data (such as numeric and waveform, numeric and trend, SYS/DIA and MAP) include a view indicator next to the name of the parameter frame. Alarm audio off Touch the left side of the parameter frame to toggle between views. Only visual notifications are enabled.
PAGE 3
Navigating the Review tab (Continuous Monitoring profile) Manage patient records (Intervals Monitoring, Spot Check, and Triage profiles) In the Continuous Monitoring profile, the Review tab enables access to a trend table of all readings for the currently monitored patient. Patient records can be sent to the network, printed, or deleted. 1. Touch the Review tab. Note Measurements that triggered a physiological alarm are highlighted on this tab. 2. Touch the View list box to modify the trend interval.
PAGE 4
Add a patient to the patient list (not connected to central station) 1. Touch the Settings tab. 2. Touch the Setup tab. 3. Touch the parameter(s) in the vertical tab you want to modify. (Touch the to scroll through the list as needed.) 1. Touch the Patients tab. 2. Touch Add. 3. Touch and then enter patient information. 4. Touch Note to cycle through the patient data fields. You can use a barcode scanner to enter a patient ID in the Patient ID field. Touch touch OK.