Product Manual

Maintenance and service

Perform periodic checks

1. Verify the following at least daily.

• The audio speaker tone, especially at startup

• The touchscreen alignment

• The date

• The time

2. Visually inspect the following at least weekly.

• The monitor for any damage or contamination

• All cables, cords, and connector ends for damage or contamination

• All mechanical parts, including covers, for integrity

• All safety-related labeling for legibility and adhesion to the monitor

• All accessories (cuffs, tubing, probes, sensors) for wear or damage

• Documentation for current revision of the monitor

3. Visually inspect the following at least monthly

• The mobile stand wheels for wear and faulty operation

• The mounting screws on wall units or carts for looseness and wear

Update settings, replace items, or call for service as necessary, based on results from a

visual inspection. Do not use the monitor if you see any signs of damage. Qualified

service personnel must check any monitor that is damaged for proper operation before

putting the monitor back into operation.

Replace the monitor battery

WARNING Personal injury risk. Improper handling of the battery can lead

to heat generation, smoke, explosion or fire. Do not short-circuit, crush,

incinerate, or disassemble the battery. Never dispose of batteries in refuse

containers. Always recycle batteries according to national or local

regulations.

1. Turn the monitor upside down to access the battery cover.

2. Locate the battery cover, indicated by .

3. Using a double-slotted screwdriver, loosen the captive screw at the base of the

battery cover, and then remove the cover.