Product Manual

Enter manual parameters
Note Authorized personnel can select and configure the Manual parameters
frame in Advanced settings. Only four parameter types appear in the
Manual parameters frame.
1. On the Home tab, press and hold the parameter desired.
2. Using either the keypad or ▲ or ▼, manually enter information for the parameter
chosen.
Note Ensure that the current patient ID is correct before saving.
3. Touch Ok to capture the parameter that you entered..
4. Touch Save to save the data.
Note During intervals, each automatic and manual save of patient measurements
clears all measurements from the Manual parameters frame.
Configuration tool
The configuration tool is a web-based tool on the Welch Allyn website. The configuration
tool enables you to set the device settings for your facility. For more information, visit
the Connex Spot Monitor page on the Welch Allyn website.
Custom scoring
WARNING Risk to patient safety. Custom scores and messages serve as
guides to your facility's protocols; do not substitute custom scores for
patient physiological alarms. Appropriate alarms settings must be set
and maintained to ensure patient safety.
Custom scoring is defined through the Configuration tool on the Welch Allyn web site.
The order in which the custom score parameters are entered in the Configuration tool is
the order in which they will appear in the custom scoring.
Custom scoring enables you to configure specific parameters, based on your institution’s
practice standards, that calculate scores for patient monitoring. These scores generate
messages regarding the patient status, based on the parameters chosen. These
messages are provided only as reminders.
Advanced settings
Consult the Connex Spot Monitor Service manual for Advanced settings.
Directions for use
Patient monitoring 77