Product Manual

Note You can configure the Intervals profile, to automatically send
measurements to the network.
Note Patient measurements older than 24 hours are automatically
deleted from the patient records list on the Review tab.
Note Modifying the date and time on the device modifies the date
and time on all saved readings on the device.
Modifiers
The Modifiers tab enables you to enter additional information for current measurements.
Set modifiers
1. Touch the Patient tab.
2. Touch the Modifiers tab.
3. Adjust the NIBP, SpO2, and temperature settings as required.
4. Touch OK to accept the changes and return to the Home tab or touch Clear to
delete all entries.
The Modifier settings clear after a power cycle, after you clear or save the Home tab,
or after you select a new patient.
Directions for use Patient data management 45