Product Manual

Add a patient

Note This option is available in the Spot and Intervals profiles.

1. Touch the Patient tab.

2. Touch in any field and then enter patient information.

3. Touch Next to cycle through the patient data fields.

Note You can use a barcode scanner to enter a patient ID in the

Patient ID field. Touch in the Patient ID field, scan

the barcode, and touch OK.

4. Touch OK to save and return to the Home tab.

Manage patient records

Patient records can be sent to the network or deleted.

Touch the Review tab.

Note Measurements that triggered a physiological alarm are

highlighted on this tab.

2. Select patients by touching the check box next to their names.

3. Touch Send to transmit the records to the network or Delete to permanently

remove the records as desired.

CAUTION Verify patient identity on the monitor after

manual or barcode entry and before transferring patient

records.

Note The icon indicates the records have been sent to the

network.

44 Patient data management Connex

Spot Monitor