Product Manual

3. Repeat the process as needed, or touch Cancel to dismiss the Bluetooth connection

screen.

Rename a laptop

You can rename a paired laptop from a system or generic name to a specific name.

1. Select the arrow button to the right of the laptop name you want to edit in the paired

list.

A screen appears that allows you to change the laptop name to a preferred name.

2. Enter the name, and then touch Save.

The new name appears in the list of paired devices.

Set the date and time

Depending on your facility's configuration, the date and time may already be set. If the

time is set in the network configuration, the network time overrides any manual time

that is set.

1. Touch the Settings tab.

2. Touch the Date / Time vertical tab.

3. Touch either the ▲ or ▼ keys or the the key pad, set the date and time.

4. Touch Set Time.

You must touch Set Time when setting the date, time, or both the date and time.

Note The date and time stamps on saved patient measurements

will adjust when you change the date and time settings.

Change the language

Refer to “Advanced Settings” in the Service manual for instructions on how to change

the language.

Power down the monitor

If you power down the monitor using the button, patient measurements are retained

in the monitor memory for a maximum of 24 hours. These saved measurements are

available for recall or electronic transmission to the network. This method also ensures

that any configuration settings you have changed and saved will be maintained at the

next startup.

Press .

If there is a software update available, then a system message asks if you want to

upgrade the software.

2. If you want to upgrade the software, touch OK.

3. If there is no system message, a dialog box appears with options.

• Sign out (if you signed in with a Clinician ID)

• Power down

• Sleep

• Cancel

28 Startup Connex

Spot Monitor