Product Manual

Message Possible cause Suggested action
Alarm
priority
Firmware update
successful.
The software successfully updated Information status message; press OK
button to dismiss.
Information
Audio alarms are off. The monitor alarm audio is off Information status message; press OK
button to dismiss.
Information
Advanced settings
unavailable.
The advanced settings are
unavailable because the monitor
is not in an idle state
Confirm that no sensors are attached to the
monitor, no alarms are active, and there is
no unsaved data in the Spot or Intervals
profile.
Information
USB accessory
disconnected.
The USB device was disconnected
from the monitor
Information status message; press OK
button to dismiss
Information
Advanced settings The Advanced settings code was
entered correctly
Information status message; Exit Advanced
settings to dismiss.
Information
Save not successful. The device configuration or logs
were not saved to the USB device
Information status message; press OK
button to dismiss
Information
Save successful. The device configuration or logs
were saved to the USB device
Information status message; press OK
button to dismiss
Information
Software upgrade is
downloading. Do not
shutdown.
Cannot power down device as
software install is in progress
N/A Information
Factory reset successful. The monitor was reset to factory
settings
Information status message; press OK
button to dismiss
Information
Factory reset failed.
Custom configuration
file not deleted.
The monitor factory reset has
failed.
Information status message; Exit Advanced
settings to dismiss.
Information
Configuration upload
successful.
The device configuration has
successfully uploaded
Information status message; press OK
button to dismiss
Information
Unable to load
configuration.
The device configuration was not
successfully uploaded
N/A Information
Software update messages
Message Possible cause Suggested action
Alarm
priority
Software Update:
Manifest transfer timed
out. Verify connection
and retry.
The manifest file transfer timed
out or connection was lost during
download
Verify the connection and retry. Information
Software Update:
Package file transfer
timed out. Verify
connection and retry
The package file transfer timed
out or connection was lost during
download
Verify the connection and retry. Information
Directions for use Troubleshooting 123