Product Manual

WARNING Masimo SpO2 monitoring is required when monitoring RRa.

WARNING Patient injury risk. Do not attempt to reprocess, recondition, or

recycle any sensors or patient cables. Doing so might damage electrical

components.

WARNING Patient injury risk. The sensor and extension cable are intended

only for connection to pulse co-oximetry equipment. Do not attempt to

connect these cables to a PC or any similar device. Always follow the

sensor manufacturer's directions for care and use of the sensor.

Before you begin, read the RRa sensor directions for use.

1. Verify that the dual cable is connected to the monitor and to the SpO2 cable and the

RRa cable. If a sensor is connected to the RRa cable, disconnect the sensor from the

cable.

Note When the RRa sensor is off the patient and is connected to

the monitor, the sensor might pick up periodic ambient

sounds and report a measurement.

2. Verify that you are using the Continuous profile.

3. Verify that the patient type is Adult.

4. Verify that the alarms are set appropriately.

5. Start monitoring SpO2 as described in this directions for use.

6. Attach the RRa sensor to the patient according to the manufacturer's directions for

use, observing all warnings and cautions.

Note The sensor is for single-patient use only. You can reuse the

sensor on the same patient if it is clean and dry, and the

adhesive still adheres to the skin. Otherwise, use a new

sensor. Do not reuse the sensor on another patient.

Note Do not use disposable sensors on patients who have allergic

reactions to the adhesive.

7. Connect the RRa sensor to the RRa cable.

8. Confirm that the monitor displays RRa data within approximately 60 seconds of

connection to the patient.

WARNING Patient injury risk. Incorrect sensor application or

excessive duration of sensor use can cause tissue damage.

Inspect the sensor site periodically as directed in the sensor

manufacturer's instructions.

Detaching the sensor during a measurement triggers an alarm.

NIBP

Noninvasive Blood Pressure (NIBP) frame

From the NIBP frame, you can measure blood pressure.

Patient monitoring Welch Allyn Connex

Vital Signs Monitor 6000 Series™