Product Manual

Alarm messages Priority
CO2 is not calibrated. Very low
Check exhaust port for occlusion. Very low
Check for occlusion in gas line. Very low
Connect or clear filter line. Very low
Purging filter line. Very low
Check calibration gas concentration. Very low
Check calibration gas flow. Very low
Calibration is overdue. CO2 might not be accurate. Very low
Factory service is overdue. CO2 might not be accurate. Very low
Calibration failed. Very low
Calibration completed successfully. Very low
Calibration aborted. Very low
RRa low signal strength. Very low
RRa write config error. Very low
RRa respiratory pause. Very low
No new RRa calculation. Very low
CO2 auto-zero in progress. Very low
Respiratory freshness timeout expired. Very low
Replace RRa sensor. Very low
Background interference detected. Very low
Patient interference detected. Very low
File system formatted on first-time startup. Very low
Lost connectivity with host. Low
Nurse call
The monitor can be connected to a Nurse Call system through a cable that connects to
the Nurse Call connector.
When the Nurse Call cable is connected and Nurse Call is enabled, the monitor notifies
the Nurse Call system when an alarm that exceeds the preset threshold occurs. Nurse
Call notification persists until one of the following occurs on the monitor:
Directions for use
Alarms 79