Product Manual

Home tab notifications
Notification Description
to the top priority message. In either option, when multiple alarm messages of the same
priority exist at the same time, the device displays the most recent of those alarm
messages first.
Information messages instruct you to interact with the monitor in a specific way or
provide information that does not require action. You can dismiss an information message
by selecting the control associated with the message or waiting for the message to time
out.
Parameter frame The background color changes. Touch this area to reset (pause or turn off) the alarm tone.
WARNING Do not pause or turn off an audible alarm if patient safety
might be compromised.
After the tone is reset, visual indicators remain until the condition is corrected, the next
measurement is taken, or the alarm is cancelled.
Alarm Limit control
The control appears in each parameter frame.
The icon in this control indicates the status of the alarm limit settings. Red and amber
icons indicate measurements that have exceeded alarm limits.
Touch this control to navigate to a parameter-specific tab where you can modify alarm
limit settings. The control also displays alarm limits in some device configurations.
Icons on the Home tab
Icons in parameter frames
The icons in the parameter frames indicate alarm notification settings. When alarm limits
are on, the icons are black and white until an alarm occurs. Then, the icons change color
to indicate the priority of the alarm. Red icons represent high-priority alarms, and amber
icons represent medium- or low-priority alarms.
Icons in parameter frames
Icon Name and status
Alarm off.
No visual or audio alarms occur for this parameter.
You are fully responsible for maintaining awareness of the patient’s condition.
Alarm on.
Audio and visual notifications are enabled.
Alarm audio off.
Only visual notifications occur.
If the patient is being monitored continuously, maintain a clear line of sight with the monitor while
audio alarms are disabled.
Directions for use Alarms 71