Product Manual

• Power down – Clears patient and location context and review data, and powers

down the device

• Cancel – Retains patient data and returns to Home tab

3. Select the desired option.

Note After approximately 20 seconds of inactivity, the "End

monitoring" dialog disappears. If you do not respond to this

dialog and continuous monitoring is interrupted, the "Confirm

patient and location" dialog appears. You must respond to

this dialog before continuous monitoring resumes.

4. If you select New patient, follow the onscreen prompt to remove sensors from your

patient (and the device, if applicable), and then touch OK.

The Home tab appears.

Assign a patient and location

You can assign a patient and location after you have begun to monitor a patient's vital

signs.

When you start to continuously monitor a patient on a device that has no patient context,

the following information message appears in the Device Status area: "Assign patient

and location."

In the top right corner of the screen, touch Assign.

The Patients > List tab appears.

Note When the monitor is connected to a central station, the

monitor automatically retrieves the patient list when you

navigate to the Patients tab.

2. If you see your patient's name on the patient list, select that patient entry, and then

touch Select.

The Home tab appears with patient and/or location information filled in according to

your monitor's settings.

Note If patient name or location information is missing, the

monitor will prompt you to "Assign patient" or "Assign

location" until that information is complete. You can monitor

the patient without entering all of these details.

3. If you patient's name does not appear on the patient list, touch Add.

4. In the Patient pane, touch in a field and enter patient information. Touch

to cycle through the patient data fields.

Note You can use a barcode scanner to enter a patient ID in the

Patient ID field. Touch in the Patient ID field, scan

the barcode, and touch OK.

5. In the Location pane, select an available room and bed from the list box.

54 Connex CS Welch Allyn Connex

Vital Signs Monitor 6000 Series™