Product Manual

When the monitor is operating in Demo mode, which requires access to Advanced

settings, the Device Status area displays an information message indicating that the

Demo mode is active, as shown below.

Any alarm messages that occur in Demo mode include a clear "DEMO MODE:" prefix as

well.

Content area

The Content area displays current vital sign measurements and patient identification. It

also provides relevant controls.

The Content area includes the following:

• A frame for each available parameter

• The Patient frame

• The Manual parameters frame (height, weight, pain, temperature, respiration, and

BMI, depending on configuration)

In the Triage, Spot Check, and Intervals Monitoring profiles, the Content area also

includes a Save button, which you use to manually save current measurements to the

Review tab. If your monitor is connected to an external system, you can send these

patient measurements to that external system as well. You can configure your monitor

to automatically send these measurements any time you press Save, or you can navigate

to the Review tab and then select specific records to send to the external system.

In the Continuous Monitoring profile, patient measurement data is automatically saved to

the Review tab. Consequently, there is no Save button on the Home tab. If the monitor

is connected to the Connex central station, the monitor automatically sends these

patient measurements to the central station as well.

Navigation Welch Allyn Connex

Vital Signs Monitor 6000 Series™