Product Manual

6. Touch OK to confirm that you want to overwrite your previous settings and replace
them with your current settings in the default startup configuration. Or touch Cancel
to retain the previous settings.
The new settings are stored as the default startup settings once you restart the monitor.
Note To enable or disable this control, navigate to the Device tab in Advanced
settings and select or deselect Enable save as default. (This requires the
Advanced settings access code.)
Note If the device is connected to Connex CS, the date and time settings are
synchronized with the Connex CS settings.
Note The date and time stamps on saved patient measurements will adjust in
response to new date and time settings.
Directions for use Startup 35