Product Manual

5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Specify the manual parameters
The Manual Parameters frame is in the lower right corner of the Home tab. You can
manually enter values for parameters in the frame. You also can specify which
parameters appear in the frame.
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the Parameters tab.
3. Touch the Manual tab.
4. Select up to four parameters and associated units of measure for display in the
Manual Parameters frame.
Note If the monitor has the SureTemp Plus temperature module,
the Temperature parameter is not available here or in the
Manual Parameters frame.
Note If the monitor is configured with CO2 or RRa, the respiration
rate (RR) parameter is not available here or in the Manual
Parameters frame.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
144 Advanced settings Welch Allyn Connex
®
Vital Signs Monitor 6000 Series™