Product Manual

CaviWipes or Sani-Cloth Plus
1. Using CaviWipes or Sani-Cloth Plus, wipe the surface of the monitor to remove all
debris.
2. Allow the monitor surface to dry for a minimum of 10 minutes before using the
monitor.
70 percent isopropyl alcohol
Wipe the monitor with a clean cloth slightly dampened with 70 percent isopropyl
alcohol.
10 percent chlorine bleach solution
1. Wipe the monitor with a clean cloth slightly dampened with a 10 percent bleach and
water solution. Follow the cleaning agent manufacturer's guidelines.
2. Rinse with a clean cloth slightly dampened with water that meets EP and USP
quality standards.
3. Allow the monitor surface to dry for a minimum of 10 minutes before using the
monitor.
Clean the accessories
1. Wipe the NIBP hose and any reusable cuffs with a damp cloth moistened in a mild
detergent solution.
2. Wipe the temperature probe with a cloth dampened with alcohol, warm water, or an
appropriately diluted, nonstaining disinfectant solution.
3. Clean the pulse oximetry sensors with a cloth dampened with 70 percent isopropyl
alcohol or 10 percent chlorine bleach solution.
4. Clean the RRa cable and the SpO2/RRa dual cable with a cloth dampened with 70
percent isopropyl alcohol.
5. Clean the ear thermometer according to the manufacturer's directions for use.
6. Clean the ear thermometer dock with the same cleaning agents used on the
monitor.
CAUTION Never immerse any monitor accessories.
Clean the stand
The same cleaning agents used on the monitor can be used on the stand and
accessory cable management system. Clean on a routine basis according to your
facility's protocols and standards, or local regulations.
Note Disinfect according to your facility's protocols and standards,
or local regulations.
Directions for use Maintenance and service 133