Product Manual

Note If any parameter's alarm limit control is set to OFF, you

cannot adjust alarm limits on the Alarm tab, and no visual or

audio signals will occur for that specific parameter.

5. Enter the desired upper and lower alarm limits for pulse rate using the up/down

arrow keys or the keypad.

6. Touch the Home tab.

The new alarm settings take effect immediately.

Manual parameters frame

The Manual parameters frame, located in the lower right of the Home tab, supports

manual entry of parameters and displays measurements taken by some accessories.

Note Manual parameters are not available in the Triage profile.

Note Body mass index (BMI) is only available with an attached weight scale that

calculates BMI.

Note When a measurement is transferred from an attached weight scale to the

monitor, the measurement displayed on the monitor is within one decimal

place (0.1) of the measurement displayed by the weight scale.

Note You cannot manually enter temperature on a monitor configured with a

SureTemp Plus temperature module.

Note You cannot manually enter respiration rate on a monitor configured with

CO2 or RRa.

Enter manual parameters

Note The Manual parameters frame enables you to enter measurements taken

manually and displays measurements taken by some accessories. You can

select and configure the parameters in Advanced settings. Only four

parameters appear in the Manual parameters frame.

CAUTION Weight scales attached to this monitor must be running on

battery power (battery type is specified in the weight scale manufacturer's

directions for use). Do not use the weight scale's external power supply.

1. From the Home tab, touch anywhere within the Manual parameters frame.

The Manual tab appears.

126 Patient monitoring Welch Allyn Connex

Vital Signs Monitor 6000 Series™