Product Manual

Set up NIBP intervals

Follow these steps to configure NIBP intervals.

1. Touch the Settings tab.

2. Touch the Setup tab.

3. Touch the Intervals vertical tab.

4. Select Automatic, Program, or Stat, and follow the steps presented in the

associated topics that follow.

5. To automatically print patient data at each interval, touch the Automatic print on

interval checkbox.

6. To start intervals immediately, touch Start intervals. Otherwise, touch the Home

tab.

The new settings take effect immediately.

Automatic intervals

You can configure the monitor to take automatic NIBP measurements at consistent

intervals. Use the spin box or keypad to set the desired interval.

Note An alarm does not turn off intervals. Subsequent automatic measurements

continue to occur as scheduled.

Start automatic intervals

Follow these steps to configure the monitor to take NIBP measurements at consistent

intervals.

Properly size the blood pressure cuff and position it around the patient’s bare upper

arm.

2. On the Home tab, touch .

3. Select Automatic.

4. Use the numeric keypad to enter the length of time between NIBP measurements.

5. Touch Start intervals.

100 Patient monitoring Welch Allyn Connex

Vital Signs Monitor 6000 Series™