User Manual Owner manual

48 Chapter 3 Patient Monitoring Welch Allyn Vital Signs Monitor 300 Series

Monitored Temperature Measurement

The procedures for monitored and predictive temperature measurements are the same,

with the following exceptions:

For monitored measurements:

• The monitor must be set to take a monitored temperature. (See “Changing

Temperature Type and Measurement Units” on page 25.)

• The monitor displays the temperature continuously.

• The measurement continues until the probe is replaced in the probe holder.

Caution Do not monitor temperature continuously for more than 5 minutes.

Note

Verify that the temperature measurement type is set to monitored. (The letter

, to the right of the temperature display window and below or ,

is illuminated.)

ºF

ºC

SYS

DIA

SpO

/min

ºC

kPa

36.9

20:27:50

8.9

14.6