User Manual

Directions for Use Chapter 5 Reviewing patient data 59

Pulse rate

The pulse rate notation does not include error information.

SpO

notation can include error information:

NIBP

NIBP notation can include error information:

Error legend

If any error indicators appear in the printed data, the monitor prints an error legend. The

error legend contains a two-line header followed by a brief explanation of each error type

encountered in the data. The illustration below shows the error legend for a batch of data

containing at least one temperature (P) error, at least one NIBP C04 error, and no

other errors.

Footer

The printout footer consists of a line containing the monitor serial number, a line

containing the monitor software version, two separator lines, and four blank lines:

C7 Malfunctioning sensor.

-- Sensor error.

C01 NIBP cycle cancelled by operator.

C02 Unable to calibrate.

C03 Cuff inflation to rapid.

C04 Excessive cuff inflation time.

C05 Excessive noise or air leak.

C06 Measurement out of range.

C10 Cuff overpressure.

| Error Codes: |

| ------------ |

| (P) Loss of tissue contact |

| C04 Excessive inflation time |

| |

| Unit S/N: JA736455 |

| S/W Ver.: 1.00.00 00005 |

| -------------------------------- |

| |