Manualshelf

User Manual Manual

ManualsBrandsWelch Allyn ManualsEquipment1500 Patient Monitor v.1.4.X
41424344454647484950
Directions for use Alarms 37
Alarm limit setting
1. Press the Setup button .
2. Select the menu item Alarms.
3. Use the trim knob to scroll through the alarm settings and select the limits.
All alarm limits are reset to the default settings after confirming a new patient
(see “Standby mode” on page 24), or switching off the monitor.
Individual parameter alarm limits can be set in the parameter menu (see
“Monitoring and Measurements” on page 39).
The Alarm settings for arrhythmia are detailed in the Arrhythmia menu option in
the setup menu.
When the monitor is connected to an Acuity Central Station, alarm limits can be
changed at the monitor or at the Acuity Central Station. When confirmed, the
alarm limits are synchronized for both the monitor and Acuity.