User Manual Manual

Directions for use Operation 25

Defining parameter fields

1. Press the Setup button .

2. Select Parameters.

The screen will vary according to the licensed options:

• etCO

, ST and CO are only displayed when the options are licensed.

•The Masimo settings enabled (yes / no), gives extra settings for SpO2

measurement (see “SpO2 monitoring” on page 68) and is only displayed when the

Masimo module is installed.

•The Temperature options are only available when two temperature connectors are

installed on the patient panel.

•The IBP options are only available when four IBP connectors are installed on the

patient panel.