Datasheet

Version 001
17
IdeaWerk Plus User Manual
4.3.9.3 Click X/Y/Z, and the three axes of IdeaWerk Plus will move along
the corresponding direction. Click the pull-down window “continue▼” to
select the step length of single movement.
4.3.9.4 After movement to a position, to lock or unlock the motor, you can
click “Lock” or “Unlock”.
4.3.9.5 Set the nozzle temperature: input the target temperature and click
“Setting”, and the nozzle begins heating. For PLA material, the
recommended temperature is 220-230 °C and for ABS material, the
recommended temperature is 230-240 °C.
4.3.9.6 Set the platform temperature: directly input the target
temperature and click “Setting”, and the platform begins heating.
4.3.9.7 After the nozzle temperature reaches the set value, you can click
“Forward/Abort/Reverse “to change the material or debug the nozzle.
4.3.9.8 Before the nozzle temperature reaches the set value, you cannot