Datasheet

Version 001
12
IdeaWerk Plus User Manual
4.3.5.3 Select the corresponding port of the IdeaWerk Plus. For example,
this IdeaWerk Plus is “COM3”. Click “Connect”.
4.3.5.4 To disconnect the IdeaWerk Plus and software, click “Disconnect”.
4.3.5.5 Change the background color: click the icon after “background”,
and there are three kinds of background images to choose from.
4.3.5.6 Click the pull-down button after “Language to choose Chinese or
English”.
4.3.5.7 After successful connection, the icon in the interface turns green
from white, as shown below.
4.3.5.8 After the GCODE file is generated or opened, click the icon “Start
Print”, and the IdeaWerk Plus start print.
4.3.5.9 To stop printing, click the icon “End Print”.
4.3.6 Control models with mouse
4.3.6.1 Click with the left mouse button to select the model, the size of the
model is displayed in the status bar at the bottom in terms of the outer
wall’s length, width and height, and a transparent box will surround the
model to show the selected status.
4.3.6.2 After the model is selected, the edit menu icons hidden on the left
will appear, as shown in Figure 4.3.7.1. If the model is not selected, the
icons are hidden.
4.3.6.3 Click the right mouse button to move, and the model display
frame can be rotated at any angle.