Owner`s manual

26
• the computer is slaved to the INT203
• Extremely efficient Jitter attenuation down to subsonic frequencies
3.4 Power
Bus power from the Firewire connector or power from an external power supply,
8 . . . 12 V/0.2 A
3.5 Level Control
With the (optional) Remote Control unit the digital output gain can be controlled
between 0 dB and -60 dB: From 0 dB to -20 dB in 0.5 dB steps and from -20 dB to
-60 dB in 1 dB steps. In the 0 dB gain position the INT203 is fully bit transparent,
i.e. it does not change the data in any way. In all other gain positions the output
signal is properly dithered to a wordlength of 24 bits. All units are shipped
with a 0 dB gain setting and non inverting polarity setting, i.e. when there is no
remote control included the unit is in fully transparent mode.
3.6 Bit Transparency Check
Allows to check the bit transparency of the player program running on the
computer. All standard sampling rates at 16 or 24 bit wordlenghts are supported.
3.7 Polarity Control
With the (optional) Remote Control unit the absolute polarity of the audio
output signal can be controlled between 0
◦
(not inverted) and 180
◦
(inverted).